Publicité
Les langues disponibles
Les langues disponibles
Always wear close-toed shoes when
using this product.
Product Information
Max Water Temperature 104°F (40°C)
Max Water Pressure
Max Water Flow
Connection
Cleaning Width
2
1. 1/4" Quick connector
2. Shroud
3. High Pressure Nozzle
4. Spray Arm
Assembly
1. Remove the surface cleaner and
instructions from the packaging. The
surface cleaner comes completely
assembled and ready for use.
16 English
2000 PSI
(13.7 KPA)
1.4 GPM
(318 LPH)
1/4" Quick
Connect Plug
inlet
11" (280MM)
1
4
3
Make sure the pressure washer
is off for the following steps.
2. Attach the surface cleaner to the high
pressure 1/4" quick connect on the
pressure washer spray wand.
3. Pull back the quick connect collar on
the spray wand
4. Push the surface cleaner connector
into the pressure washer spray wand
quick connect.
5. Push the collar forward until it clicks
into place.
6. Check that the surface cleaner is
connected by pulling the surface
cleaner forward.
7. Connect the wand to the spray gun in
accordance with the pressure
washer's instruction manual.
8. Start the pressure washer and begin
cleaning.
Publicité
