Publicité
Les langues disponibles
Les langues disponibles
Pump Guard
Specially formulated to protect your
pressure washer from freezing,
corrosion and premature wear.
The Pump Guard also adds lubrication
to valves and seals to prevent
sticking. Highly recommended for all
Kärcher pressure washers!
Part Number 9.558-998.0
11" Surface Cleaner
Read and comply with these
original operating instruc-
tions prior to the initial
operation of this product.
Please retain and store them
in a safe place for later reference.
●
Please read, understand and follow
the safety and operating instructions
for the pressure washer that will be
used with this surface cleaner.
●
Make sure that the pressure washer
used does not exceed the pressure
and flow ratings for this surface
cleaner.
●
Make sure that there are no persons /
animals in the immediate vicinity of
the cleaning head.
●
Turn off and disconnect the pressure
washer when not in use.
●
Do not operate this product if you are
unwell or under the influence of drugs
or alcohol.
●
After use and before servicing,
always release the pressure and dis-
connect the surface cleaner from the
spray wand.
●
This surface cleaner must not be
operated by children.
●
Keep fingers and hands away from
moving parts.
●
Keep hands and feet from beneath
the shroud.
●
Only trigger the gun if the surface
cleaner is resting on the surface to be
cleaned.
●
Wear eye protection with side shields
that are marked to comply with ANSI
Z87.1 when operating this product.
English 15
Publicité
