Attaching And Aligning The Furniture Door (Freezer Compartment) - Gaggenau RB 491 Instructions D'installation

Notes:
– Attach the adjusting rail to the furniture door with at least
10 screws. One screw should be inserted under each
double threaded bolt.
– The adjusting rail features a variety of holes for the many
different design options of furniture doors. Always screw
into the best load-bearing material of the furniture door.
24. Attaching and aligning the furniture
door (freezer compartment)

Hang the furniture door on the double threaded bolt.

Align the furniture door with the double threaded bolts
(Torx screwdriver).

Transfer the middle drill holes along the outer edge of
the appliance door to the furniture front and mark.

Remove the furniture door.
32

Using the positioning aid, set both longitudinal sides of
the furniture door parallel.

Using a square, extend the drill hole marks which you
have just made to the vertical marks.

Apply the fixing rib and mark out the holes.

Pre-drill the holes.

Screw on the fixing ribs.