Silverline 427558 Mode D'emploi page 7

Daily maintenance procedure
1. Disconnect from the air supply
2. Pour 2-3 drops of air tool oil into the air intake
• If the machine is in constant use or used for long periods at a time, the above procedure should
be repeated up to 3 times per day. Alternatively, fit an inline lubricator. Use air tool oil. DO NOT
UNDER ANY CIRCUMSTANCES USE NORMAL ENGINE OIL
• There must be an air filter fitted at all times
• Failure to comply with the operating and maintenance instructions may invalidate the guarantee
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
• Store grease guns and cartridges in an upright position
• Cover the Coupler (10) to minimise the risk of accidental contamination
Contact
For technical or repair service advice, please contact the helpline on (+44) 1935 382 222
Web: www.silverlinetools.com
UK Address:
Toolstream Ltd.
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
EU Address:
Toolstream B.V.
Hogeweg 39
5301 LJ Zaltbommel
The Netherlands
Disposal
• Empty all remaining grease into a sealed container prior to recycling the tool, and dispose of
grease according to laws and regulations
• As with other power tools, air tools should not be disposed of with household waste
• Air tools may contain traces of tool oil and other lubricants and so must be recycled accordingly
• Contact your local waste disposal authority for information on the correct way to dispose of
grease and power tools
Air Grease Gun 400cc
silverlinetools.com
7