Craftsman CMXEVBE170400 Guide D'utilisation page 5

CARTON CONTENTS (Fig. B)
Remove entire contents of carton. Check each item against
the Carton Contents List.
If any parts are damaged or missing, immediately call
Customer Service at 1-888-331-4569
(Mexico 001-881-331-4569).
Fig. B
F
G
INSTALLATION
Powerhead Assembly (Fig. C)
1. Line up the Front (label and switch side) of the
Powerhead with the Vac Inlet Port located on the Front
of the Drum.
NOTE: Powerhead must be aligned with Drum for proper
attachment.
2. Place Powerhead on Top of Drum.
3. Be sure Powerhead completely covers the top of the
Drum so leakage does not occur.
4. Push down the Latches, and the Powerhead will attach
to the Drum.
5. To remove the Powerhead, pull up on the Latches and
remove from the Drum.
SP7130-1 CMXEVBE17040.indb 5 SP7130-1 CMXEVBE17040.indb 5
B*
A
C*
D*
H
E
I
J**
K
Key Description
A Vac Assembly
B * Tool Caddy
C * Wheels
D * Casters
E Hose Assembly, 1-7/8" x 7'
F Car Nozzle, 1-7/8"
G Utility Nozzle, 1-7/8"
H Dusting Brush, 1-7/8"
I Extension Wands, 1-7/8"
J ** Qwik Lock™ Filter
K Instruction Manual
* These parts come pre-assembled.
**Filter may already be assembled.
NOTE: See Repair Parts List for Part Numbers.
WARNING:
!
For your own safety, never connect plug to
power source outlet until all assembly steps
are complete and you have read and under-
stood the safety and operation instructions.
Do not operate vacuum with any parts damaged or
missing.
Fig. C
Powerhead
Assembly
Switch
Label
Inlet
Port
CMXEVBE170400
4 Gallon
(15 Liter)
1
1
2
2
1
1
1
1
2
1
1
Latches (2)
Drum
5
3/21/23 8:55 AM 3/21/23 8:55 AM