Publicité
Les langues disponibles
Les langues disponibles
en Home Connect
Manual registration in the home
network
Use the rotary selector to select
1.
"Connect manually" on the display.
Press the right-hand navigation
2.
button under "confirm". The fully
automatic coffee machine sets up a
separate WLAN network which can
be accessed with a tablet or
smartphone. The display shows the
SSID (the name) and the key (the
password) of this network.
Log the mobile device in to the
3.
network of the fully automatic coffee
machine with the "HomeConnect"
SSID and the "HomeConnect" key.
Start the app on the mobile device
4.
and follow the instructions for
network login in the app and the
Home Connect documents supplied.
The login process is complete when
"Network connection successful"
lights up briefly in the display of the
fully automatic coffee machine.
Use the rotary selector to select
5.
"Connect to app" on the display.
Press the right-hand navigation
6.
button under "select". The fully
automatic coffee machine connects
to the app.
Wait until "Successfully connected to
7.
app" lights up briefly in the display.
Use the rotary selector to select
8.
"Turn on remote start".
Press the right-hand navigation
9.
button under "select". A warning
message appears.
Press the right-hand navigation
10.
button under "continue" and read the
warning message.
Press the right-hand navigation
11.
button under "confirm".
Press the $/± button to close the
12.
menu. With the mobile device the
functions of the fully automatic
coffee machine can now be used to
their full extent via the app.
68
If "Turn off remote start" is
Note:
selected, only the modes of the fully
automatic coffee machine are displayed
in the Home Connect app. You can
specify settings but not start drinks
dispensing.
Switching Wi-Fi on and off
Wi-Fi can be switched "on" or "off" as
required (e.g. when on holiday).
Network information is retained
Note:
after the appliance is switched off.After
switching on, wait a few seconds until
the fully automatic coffee machine has
connected to the WLAN network again.
In networked standby mode the
appliance requires a maximum of 2 W.
Press $/± button to open "Menu".
1.
Turn the rotary selector to the left
2.
and select "Home Connect setting".
Press the rotary selector.
3.
Use the rotary selector to select
4.
"Turn on Wi-Fi" or "Turn off Wi-Fi".
Press the right-hand navigation
5.
button under "select" to switch the
radio module "on" or "off".
Press $/± button to close the menu.
6.
Additional settings
Home Connect can be adapted to your
individual needs at any time. Note: The
fully automatic coffee machine must be
connected to the WLAN network.
Disconnecting
The fully automatic coffee machine can
be disconnected from the WLAN
network at any time.
If the fully automatic coffee
Note:
machine is disconnected from the
WLAN network, it cannot be operated
using Home Connect.
Publicité
