Publicité
Les langues disponibles
Les langues disponibles
6. INSTALLATION
01
Remove the grille .
03
Remove the screws at the top and bottom of the unit.
The further technical installation is identical for the Briza built-in and surface-mounted units.
– Take the indicated free space around the device into account .
– If the unit is used for cooling, the hydraulic pipes must be insulated.
– When using devices for cooling: iron couplings prohibited.
05
Mark the fixing points on the wall or ceiling so that they will match
those of the device, or according to the dimensions as indicated
on p.43.
JAGA NV | BRIZA 12 - STAND ALONE / BUILT-IN | MANUAL | 2021.01.25 | V_09
46
02
Only for ceiling-mounted installation :
- Unscrew the grid guard .
- Slide the clamping plates to the outside of the grid .
04
The casing can now be removed in its entirety
06
The type of wall/ceiling determines the type of plug and screw that
needs to be used.
Publicité
