Honeywell Home T6 Pro Z-Wave TH6320ZW2003 Guide De L'utilisateur page 3

Thermostat features
The T6 Pro Z-Wave Programmable Thermostat is a Z-Wave Plus™ certified thermostat
designed to work with any Z-Wave compliant controller or gateway for easy
programming and automation to deliver energy savings and comfort at the same time.
The thermostat can be operated in any Z-Wave network together with other Z-Wave
certified devices from other manufacturers. All non-battery operated Z-Wave devices
(nodes) within the network will act as repeaters regardless of manufacturer to increase
reliability of the network. When integrated with the app that controls your Z-Wave
controller, it lets you program and control your home's HVAC system as well as control
other Z-Wave devices connected to the same Z-Wave controller.
Flexible scheduling: The thermostat is fully programmable when not included into
a Z-Wave network. Each day can be programmed for different heating and cooling
settings in 4 unique periods (Wake, Away, Home, Sleep). The thermostat scheduling
options available differ depending on whether the thermostat is included or excluded
from Z-Wave network, on capability of your Z-Wave controller and app to program
thermostat.
Displays ambient air temperature, % relative indoor humidity and reports HVAC
system status: You can display actual temperature or % relative humidity, or to see
whether your cooling / heating system is running.
Auto change from heat to cool: When Auto mode is selected, the T6 Pro Z-Wave
thermostat can automatically determine whether your home needs heating or cooling
to reach the desired temperature at the right time.
Smart Alerts: The T6 Pro Z-Wave thermostat can alert you when your HVAC system is
not working properly and can remind you for things like when to change your furnace
filter.
Adaptive Intelligent Recovery: The T6 Pro Z-Wave thermostat learns your heating
and cooling cycle times to make sure the system delivers the temperature you want,
when you want it. (Available only if the local thermostat schedule is enabled.)
Power method: Designed for battery operation (3 x AA batteries) or for 24 VAC power
operation (via a "C" or common wire).
SmartStart: (TH6320ZW2007 model only). After the initial setup and time/date
have been set, the TH6320ZW2007 thermostat will initiate SmartStart. Icon in upper
right of display will flash. Thermostat stays in SmartStart mode indefinitely until it is
included in a Z-Wave network.
Identify thermostat: (TH6320ZW2007 only). If the thermostat is included in a Z-Wave
Network. You can choose to identify the thermostat via Z-Wave app. Backlight will
flash. Touching display while flashing will stop Identify mode. This is helpful when
multiple thermostats are on the same Z-Wave Network.
Excluding thermostat: If the thermostat is connected to a Z-Wave network that you
wish to remove it from, select "Menu". Then touch the right arrow until Z-Wave network
is shown. Touch "select". The display should show "exclude" if it is currently connected
to a Z-Wave network. Touch select to exclude the thermostat from the network.
3