Honeywell Home T6 Pro Z-Wave TH6320ZW2003 Guide De L'utilisateur page 17

Enabling/disabling Adaptive Intelligent Recovery
Over time, your T6 Pro Z-Wave thermostat will
learn how long it takes your system to reach
the desired temperature. It can then turn on
your heating or cooling equipment at the right
time to make sure your home is comfortable by
the time you expect. This feature is is available
only if thermostat schedule is enabled in the
thermostat Installer setup menu and turned On.
To disable it follow steps below:
1 Touch Menu on the thermostat home screen.
2 Touch the
RECOVERY, then touch Select.
3 Touch the
RECOVERY ON or RECOVERY OFF, then
touch Done to confirm.
When Adaptive Intelligent Recovery is active,
you'll see the recovery symbol in the upper-right
corner of the thermostat screen.
Setting the time and date
Setting the time
Touch Menu on the thermostat home screen.
1
2 Touch the
CLOCK, then touch Select.
3 Touch the
TIME, then touch Select.
4 Press or
hold the buttons to move more quickly).
Touch Done when finished.
5 Set clock format (12 hours or 24 hours) and
daylight saving time in the same CLOCK
sub-menu.
Setting the date
1 Touch Menu on the thermostat home screen.
2 Touch the
then touch Select.
3 Touch or
Select to confirm.
4 Continue to set day and year in the same
way. Touch Select to save your changes.
or arrows until you see
or arrows to select
or arrows until you see
or arrows until you see SET
to set the time (or press and
or arrows until you see DATE,
to set the month, then touch
Back
Back
17
Done Cancel
Select
MCR36378
AM Recovery
Following Schedule
Mode Fan
Heat Auto
Away Home Sleep
Mode Menu Fan
MCR37052
Back Select
MCR36334
PM
Done Cancel
MCR36335
Select Back
MCR36336
Recovery
MCR36529A
Select
MCR36603