Honeywell Home T6 Pro Z-Wave TH6320ZW2003 Guide De L'utilisateur page 15

Reset schedule
To reset the thermostat schedule back to the
default temperature settings (see "Scheduling
options" on page 12), follow steps below.
1 Touch Menu on the thermostat screen.
2 Touch the
RESET, then touch Select.
3 Touch the
SCHEDULE, then touch Select.
Touch Yes to confirm. Note:
4
NOTE: Reset schedule menu option is available
only if thermostat schedule enabled in the
thermostat Installer setup menu.
Screen lock settings
To prevent unauthorized access to the thermostat, or to limit changes to the system
settings, there are two screen lock settings you can apply.
• Partial lock: Only the temperature can be changed.
• Full lock: No access is allowed without a PIN number.
Applying a screen lock setting
Touch Menu on the thermostat home screen.
1
2 Touch the
SCREEN LOCK, then touch Select.
3 Touch the
desired screen lock setting, then touch Select.
4 A PIN number will appear on screen. Write
it down and keep it in a safe place for later
reference.
5 Touch Select, and confirm your screen lock
setting by touching Yes.
A partially or fully locked screen will be indicated
by a lock symbol at the bottom of the thermostat
screen.
or arrows until you see
or arrows until you see
or arrows until you see
or arrows to select your
Back
Back
Back
15
Select Back
MCR36357
No Yes
MCR36330
Select Back
MCR36392
No
Select
MCR36393
Select
MCR36347
Select
M36190
Yes
MCR36394