Honeywell Home T6 Pro Z-Wave TH6320ZW2003 Guide De L'utilisateur page 22

Number Alert/Reminder Definition
184 Replace
Humidifier Pad
185 Replace
Dehumidifier
Filter
187 Clean or
Replace
Ventilator Filter
188 Replace UV
Bulb (1)
189 Replace UV
Bulb (2)
252 AC Power Lost
405 Battery Low
407 Battery Critical
546 Z-Wave Not
Configured
547 Z-Wave Radio
Error
Replace humidifier pad. Reset the timer by touching
the "dismiss" button on the thermostat screen after it
is replaced.
Replace the dehumidifier filter. Reset the timer by
touching "dismiss" button on thermostat screen after
it is replaced.
Clean or replace ventilator filter. Reset the timer by
touching the "dismiss" button on thermostat screen
after it is replaced.
Replace UV Bulb (1). Reset the timer by touching
the "dismiss" button on thermostat screen after it is
replaced.
Replace UV Bulb (2). Reset the timer by touching
the "dismiss" button on thermostat screen after it is
replaced.
If batteries used as backup power it will drain
batteries quickly and Z-Wave communication needs
to be turned off. The working power mode can only
be changed when thermostat is NOT included in
a Z-Wave network. Either to exclude and include
thermostat into Z-Wave network to change the power
mode to LSS (power-save, sleep mode) or to resume
AC power. You can check the actual power mode in
the thermostat MENU/DEVICE INFO.
Battery low. Please turn the system mode to off and
replace the batteries.
Battery critical. Thermostat cannot control your
system. Please replace the batteries immediately.
Z-Wave has not been configured yet to receive
commands from your Z-Wave network. Please follow
steps on how to include thermostat into Z-Wave
network.
Z-Wave module is not operating. Thermostat cannot
receive commands from your Z-Wave network. Please
contact dealer to replace the thermostat.
22