Publicité
Les langues disponibles
Les langues disponibles
2610045251.qxp_GSB18V-755C GSR18V-755C 6/25/18 11:01 AM Page 12
MODE SELECTOR SWITCH
The mode selector switch allows the tool to be
set for various drilling or driving applications.
Turn the mode selector switch right or left
depending on the below applications (Fig. 9).
FIG. 9
SELECTOR
Drill only action: This mode will lock up the
clutch to permit drilling and driving heavy
duty work, and also will enable bits to be
changed quickly and easily in the keyless
chuck
Driver mode: To drive screws, nuts, and
bolts with use of the adjustable clutch
settings.
Drill
with
(GSB18V-755C Model only): For
drilling in concrete, asphalt, tile or other
similar hard materials. The hammer
drill position overrides the clutch for
drilling.
Set Forward/Reversing lever to the center (off
position). Slide charged battery pack into the
housing until the battery pack locks into position
(Fig. 11).
Your tool is equipped with a secondary locking
latch to prevent the battery pack from completely
falling out of the handle, should it become loose
due to vibration.
12
MODE
SWITCH
hammer
action
INSERTING AND RELEASING BATTERY PACK
SAVE THESE INSTRUCTIONS
ADJUSTABLE CLUTCH
Your tool features 25 clutch settings. Output
torque will increase as the clutch ring, is rotated
from 1 to 25. The tool will stop rotating as soon as
the set torque is reached during operation (Fig.
10).
FIG. 10
ADJUSTABLE
CLUTCH
BRAKE
When the trigger switch is released it activates
the brake to stop the chuck quickly. This is
especially useful in the repetitive driving and
removal of screws.
BUILT IN LED WORK LIGHT
Your tool is also equipped with an LED light that
turns on automatically when the switch is
activated, for better visibility when drilling/ driving
(Fig. 1). The light turns off automatically a short
time after the trigger is released. You can adjust
this time frame using Bosch Tool Box app. See
"Connectivity" section.
FIG. 11
BATTERY PACK
Publicité
