Publicité
Les langues disponibles
Les langues disponibles
Installing the Remote Control
Holder
Step 1. Remove the remote control holder cover
from the remote control holder.
Step 2. Attach the remote control holder with the
two remote control holder mounting screw
provided. (Fig. 20)
Step 3. Replace the remote control holder cover
into remote control holder.
Screws
Figure 20
11.
Care of Your Fan
Here are some suggestions to help you maintain
your fan
1. Because of the fan's natural movement, some
connections may become loose.
support connections, brackets, and blade
attachments twice a year.
secure.
(It is not necessary to remove fan from
ceiling.)
2. Clean your fan periodically to help maintain
its new appearance over the years. Use only a
soft brush or lint-free cloth to avoid scratching
the finish. The plating is sealed with a lacquer to
minimize discoloration or tarnishing. Do not use
water when cleaning. This could damage the
motor or possibly cause an electrical shock.
Remote Control
Holder Cover
Remote
Control
Holder
3.
There is no need to oil your fan.
has permanently lubricated bearings.
Check the
MAKE SURE THE POWER IS OFF AT THE
ELECTRICAL PANEL BOX BEFORE YOU
Make sure they are
ATTEMPT ANY REPAIRS. REFER TO THE
SECTION "MAKING ELECTRICAL
The motor
IMPORTANT
CONNECTIONS".
Publicité
