Publicité
Les langues disponibles
Les langues disponibles
72
Advanced settings
En
Setting
DRC (Dynamic Range
Control)
Speaker Setup
Test Tone
Color Space
Resolution
HDMI Audio Out
HDMI Deep Color
HDMI 1080P 24Hz
8
HDMI 3D
3D Notice
Options
Explanation
Off
Select this to output audio signals without using the DRC function.
On
Select this to adjust the range between the loudest and softest sounds
(dynamic range) for playback at average volume. Use this when it is hard to
hear dialog or when watching movies at midnight.
Auto
Select to switch the DRC setting On/Off automatically according to the input
audio signal from the disc. This only affects Dolby TrueHD signals.
• This affects such audio signals as Dolby Digital, Dolby TrueHD, and Dolby Digital Plus.
• Depending on the disc, the effect may be weak.
Adjust the Trim (output level) and Delay (distance from viewers) of the speakers.
Please see "Adjust speaker settings" for more details (page 75).
Output a test tone from the speakers.
RGB
Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
YCbCr
Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr 422
Select this to output the video signals as YCbCr 4:2:2 signals.
Full RGB
Select this to output the video signals as RGB signals. Choose this if the
colors seem too dense and all the dark colors are displayed in a uniform
black.
Auto
Select this to choose the resolution of the video signals output from the
HDMI OUT terminal automatically.
Output the video signals from the HDMI OUT terminal with the selected
480I/576I
resolution.
480P/576P
The resolution can be changed by pressing RESOLUTION, but Auto cannot be
720P
selected.
1080I
1080P
Bitstream
Select this to output HDMI audio signals directly.
PCM
Select this to output HDMI audio signals converted to 2-channel audio
signals.
Reencode
When a BD containing secondary audio and interactive audio is played, the
two audio signals are mixed and converted to DTS audio for output.
Off
Select this when you do not want to output the audio signal from the HDMI
output terminal.
30bits
Select this when outputting the video signals with 30-bit color.
36bits
Select this when outputting the video signals with 36-bit color.
Off
Select this when outputting the video signals with normal 24-bit color.
On
Select this when Resolution is set to Auto or 1080P and outputting 1080p/24
video signals to a TV compatible with 1080p/24.
Off
Select this when Resolution is set to 1080P and outputting 1080p/60 video
signals to a TV compatible with 1080p/60.
Auto
With 3D discs, the disc is played with 3D images.
Off
3D images are not played.
Yes
This sets whether or not to display the 3D notice when playing 3D images.
No
Publicité
