Publicité
Les langues disponibles
Les langues disponibles
Speaker setup for HTZ-BD92HW
Preparing the speakers
1. Attach the non-skid pads to the base of
each speaker.
For front speaker:
Use the supplied adhesive to attach six
pads to the base (bottom) of speaker.
Affix to
three locations
Non-skid pad
(for front)
2. Connect the wires to the player.
Insert the cables connected to the player to
the same colored connector on the speaker.
Caution
• Do not connect any speakers other than those
supplied to this system.
• Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
• Please connect the speaker cable of subwoofer
(purple) to orange of the player.
• These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
Non-skid pad
(for front)
Connecting
29
En
2
Publicité
