GRAUPNER 6441 Instructions D'utilisation page 29

NiCd
AUTOMATIC
program
MODE (2 sec.)
NiMH
AUTOMATIC
program
MODE (2 sec.)
Lithium
MANUAL
program
MODE (2 sec.)
Pb
MANUAL
program
MODE (2 sec.)
When the INC and DEC buttons are pressed simultaneously and the ULTRAMAT 16 is initially
connected to a 12 V DC car battery or power supply or a 100~240V AC mains socket, the unit goes
to the language select menu, otherwise it runs through the information routine which provides you
with a brief summary of the essential user settings. The charger's screen displays the following
information.
INC
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
L A N G U A G E SE L E C T
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
E N G L I S H
ENTER
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
G r a u p n e r
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
U L T R A M A T
3 sec.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
S a f e t y t i m e r
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
o n
3 sec.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
b u z z e r
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
o n
8. Selecting the charge program group
In the interests of clarity, the charge and set-up facilities of the
ULTRAMAT 16 are divided into four logical program groups.
MODE
A separate program group is provided for each of the different
battery types: Nickel-Cadmium, Nickel-Metal-Hydride, Lithium-
Ion / Lithium-Polymer / LiFePO
MODE
batteries.
Switching programs:
MODE
Changing from one program group to another is carried out using
the MODE button, which must be held pressed in for about two
seconds. A brief press on the MODE button makes changes within
the program group.
MODE
9. Using the charger for the first time
DEC
Press and hold the INC and DEC buttons simultaneously,
then switch on the charger to get the language selection
display. Select your language using the INC or DEC button
and confirm with pressing the ENTER button.
The ULTRAMAT 16's name appears on the screen.
1 6
After 3 sec. the adjustment of the safety timer (on or off) is
displayed. For about 3 sec. the safety timer can be switched
on or off by pushing the INC or DEC button.
The safety timer is always switched of for discharging and for
Pb manual charge.
For all other charging programs, the safety timer will be 180min,
if it's switched on.
After another 3 sec. the adustment of the buzzer (on or
off) can be changed by pushing the INC or DEC button.
After another 3 sec. the charger is now ready for use, see
10..
(LiFe) and Pb (lead-acid)
4
29