SOMFY SITUO 1 io II Manuel D'installation Et D'utilisation page 27

7
REPLACING THE BATTERY
Risk of explosion if the battery is replaced by an incorrect type.
1.
Unscrew and remove the rear cover of the remote control.
2.
Push the battery out of its housing using a plastic object.
3. Insert a 3V CR2032 battery, with the plus (+) side visible. Make sure the polarity is correct.
The power supply terminals must not be short-circuited.
Push the battery fully into its housing.
4.
Replace the cover.
5. Screw the rear cover back into place.
Please separate batteries from other types of waste and recycle them via the local collection system.
1
3
3 V
CR2032
12 EN - Installation and operating guide SOMFY io 1-channel – 5-channel remote controls
4
3 V
B
C
A
5
A
B
2
3 V