SOMFY SITUO 1 io II Manuel D'installation Et D'utilisation page 20

PROGRAMMING YOUR REMOTE CONTROL
3.1 Programming on a Somfy io remote-controlled socket
▶ Programming a remote control
1. Check that the remote-controlled socket is switched on.
During this operation, disconnect all other Somfy remote-controlled sockets in your home.
2.
Press the channel selection button as many times as necessary until the indicator lights show the channel to
be programmed.
3.
Press the programming button on the remote-controlled socket until the indicator light flashes.
4.
Use a fine-tipped object to make a short press on the PROG button on the back of the remote control.
The indicator light on the remote-controlled socket will come on permanently, then go off.
2 3
Example with Somfy io remote-controlled socket
EN - Installation and operating guide SOMFY io 1-channel – 5-channel remote controls
4
3
5