SOMFY SITUO 1 io II Manuel D'installation Et D'utilisation page 25

5
INSTALLING THE REMOTE CONTROL WALL MOUNTING
This product must not be installed at a height greater than 2 m.
Following the illustration:
1.
Remove the protective film from the adhesive on the back of the wall mounting.
2. Fasten the wall mounting to a flat, clean and dry surface and press to ensure optimum bonding.
3.
Place the Situo io remote control on its holder.
1
10 EN - Installation and operating guide SOMFY io 1-channel – 5-channel remote controls
2 3