Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Symptom
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND
SERVICE" appears.
Source cannot be selected.
The unit does not work
at all.
Correct characters are not
• This unit can only display uppercase letters, numbers,
displayed.
• Depending on the display language you have selected
DAB reception is poor.
"DAB ANT ERR"
"RELATED SERV FOUND"
• Press the volume knob to activate Soft-Link. (Page 8)
• Press
• Radio reception is poor.
• Static noise while
listening to the radio.
Remedy
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 5)
Reset the unit. (Page 3)
and a limited number of symbols.
(page 6), some characters may not be displayed
correctly.
Make sure [ON] is selected for [DAB ANT POWER].
(Page 5)
Check the DAB antenna. If a passive antenna (without
a booster) is used, set [DAB ANT POWER] to [OFF].
(Page 5)
to cancel.
Connect the antenna firmly.
Symptom
Remedy
Disc cannot be ejected.
Press and hold
to drop the disc when it is ejected. If this does not solve
the problem, reset the unit (page 3).
Noise is generated.
Skip to another track or change the disc.
"PLEASE EJECT" appears.
Reset the unit (page 3). If this does not solve the
problem, consult your nearest service center.
Playback order is not as
Optical disc, the files are played in the order which they
intended.
were recorded.
USB device, the folders are played in the order of creation
(date and time). The files within each folder are played in
the order of the file name (alphabet).
Elapsed playing time is not
This depends on the recording process earlier (disc/USB).
correct.
"READING" keeps flashing.
• Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the device (USB/iPod/
iPhone).
"UNSUPPORTED DEVICE"
• Check whether the connected USB device is compatible
appears.
with this unit and ensure the file systems are in
supported formats. (Page 37)
• Reattach the USB device.
"UNRESPONSIVE DEVICE"
Make sure the USB device is not malfunction and reattach
appears.
the USB device.
"USB HUB IS NOT
This unit cannot support a USB device connected via a
SUPPORTED" appears.
USB hub.
to forcibly eject the disc. Be careful not
39
ENGLISH
Publicité
