Publicité
Les langues disponibles
Les langues disponibles
Installation/Connection
CAUTION
When installing the antenna cable inside the front pillar with the air bag installed
• The front pillar cover is secured with a special clip
which may need to be replaced when it is removed.
Contact your vehicle dealer for details on removing
the front pillar cover and availability of replacement
parts.
• Install the amplifier unit (F) above the air bag so that
it does not obstruct the operation of the air bag.
Installation overview
The antenna should be installed
on the passenger side for safety.
Antenna installation
1 Remove the front pillar cover of your car.
Clip
Front pillar
2 Clean the windscreen with the supplied cleaner (H).
Air bag
– Wait until the glass surface is completely dry before proceeding.
– Warm the surface of the windscreen with defroster if it is cold (during winter).
3 Remove the separator (tag 1) of film antenna (E) horizontally and paste the antenna on
the windscreen.
Do not touch the pasting surface (adhesive side) of the film antenna (E).
Front pillar
Separator (tag 1)
35
ENGLISH
Publicité
