Publicité
Les langues disponibles
Les langues disponibles
Basics
To
Turn on the power
Adjust the volume
Select a source
Change the display information
4
ENGLISH
On the faceplate
Press B SRC.
• Press and hold to turn off the power.
Turn the volume knob.
• Press B SRC repeatedly.
• Press B SRC, then turn the volume
knob within 2 seconds.
Press DISP repeatedly. (Page 38)
Getting Started
1
Select the display language, acknowledge the crossover
type and cancel the demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES], see page 6), the display shows: "SEL LANGUAGE" "PRESS"
"VOLUME KNOB"
1
Turn the volume knob to select [EN] (English) / [RU] (Russian) /
[SP] (Spanish) / [FR] (French) / [GE] (German), then press the knob.
[EN] is selected for the initial setup.
Then, the display shows: "2-WAY X ' OVER" or "3-WAY X ' OVER"
"VOLUME KNOB"
"TO CONFIRM".
2
Press the volume knob to acknowledge the current crossover type.
• To change the crossover type, see "Change the crossover type" on
page 6.
Then, the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB".
3
Press the volume knob again.
[YES] is selected for the initial setup.
4
Press the volume knob again.
"DEMO OFF" appears.
"PRESS"
Publicité
