Publicité
Les langues disponibles
Les langues disponibles
a) Place a tool (6a or 6b) into the tool
holder (6) and snap into position.
Place the tool holder on the centre pin
of the bowl and give it a turn to lock
into place.
b) Attach the lid (2) onto the bowl with
the interlock (2c) positioned next to
the bowl handle. To lock the lid, turn
it clockwise so that the interlock
engages with a «click» above the
handle.
c) To attach the motor part, first slide up
the cover of the opening for the FP
attachment. When attaching the motor
part to the coupling (2a), make sure
that the marking on the lid aligns with
the marking on the motor part. Then
turn the motor part 90° clockwise, until
it locks. Select speed settings accord-
ing to recommendations in table (i).
d) Fill the food to be processed into the
filling tube. Never reach into the filling
tube when the appliance is switched
on. Always use the pusher (1) to feed
in food.
e) Press and hold the on/off switch as
long as you operate your FP attach-
ment.
f) After use, turn the appliance off by
releasing the on/off switch and unplug
it, before you start disassembling.
To remove the motor part, hold the
FP attachment with one hand, turn the
motor part 90° anti-clockwise and lift
it off.
g) Pressing the lid interlock (2c), turn the
lid counter-clockwise to unlatch it and
lift it up.
h) Take out the tool holder before
removing the processed food.
To remove the tool, push it up at the
end that protrudes at the bottom of
the tool holder.
Cleaning the appliance
C
section
)
Clean the motor part with a damp cloth
only. The lid (2) can be cleaned under
running water, but do not immerse it in
water, nor clean it in a dishwasher.
All other parts can be cleaned in the
dishwasher.
When processing foods with colour (e.g.
carrots), the plastic parts of the appliance
may become discoloured. Wipe these
parts with vegetable oil before cleaning
them.
Subject to change without notice.
Please do not dispose of the
product in the household waste at
the end of its useful life. Disposal
can take place at a Braun Service
Centre or at appropriate collection
points provided in your country.
Français
Nos produits sont conçus et fabriqués
pour satisfaire aux plus hautes exigences
de qualité, de fonctionnalité et de design.
Nous espèrons que votre nouveau prépa-
rateur culinaire Braun vous apportera
entière satisfaction.
ATTENTION
Lisez le mode d'emploi attentivement
et en entier avant d'utiliser cet
appareil.
•
•
•
•
•
•
(see picture
Description
1 Poussoir
2 Couvercle
2a Bloc moteur
2b Tube de remplissage du bol
2c Système de fermeture du couvercle
3 Couteaux
4 Bol
5 Base anti-dérapante (sert aussi de
6 Disque de soutien des accessoires
6a Accessoire pour émincer
6b Accessoire pour broyer
Les lames sont très tranchantes!
Avant de mettre en marche l'appareil,
assurez-vous de la fermeture du
couvercle (2c) et du bon position-
nement du poussoir (1).
Ne pas insérer d'autres accessoires
que le poussoir (1) dans le tube de
remplissage pendant le fonctionnement
de l'appareil.
Toujours éteindre l'appareil avant de
retirer le couvercle (2).
Le couvercle (2) peut être nettoyé sous
l'eau courante, mais ne doit pas être
immergé sous l'eau ni mis au lave-
vaisselle.
Ne pas mettre le bol (4) au micro-
ondes.
couvercle)
9
Publicité
