Sony VPL-PWZ10 Guide De Référence Rapide page 38

Step 2
Notes
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; Loose connections may reduce performance of
picture signals or cause a malfunction. When pulling out a cable, be sure to grip
it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you
are connecting.
Connecting a Computer
Computer
Notes
• Use HDMI-compatible equipment which has the HDMI Logo.
• Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony
products are recommended.)
• The HDMI terminal of this projector is not compatible with DSD (Direct Stream
Digital) Signal or CEC (Consumer Electronics Control) Signal.
14
GB
Connecting
Connecting
HDMI cable (not supplied)
HDMI output
terminal
For information on other connecting methods,
refer to "Connecting the Projector" in the Operating
Instructions contained in the supplied CD-ROM.