Publicité
Les langues disponibles
Les langues disponibles
Connecting Alarms
AI (Alarm In)
You can use external devices to signal the network camera to react on events. Mechanical
or electrical switches can be wired to the AI (Alarm In) and G (Ground) connectors.
G (Ground)
Connect the ground side of the alarm input and/or alarm output to the G (Ground)
connector.
AO (Alarm Out)
The network camera can activate external devices such as buzzers or lights. Connect the
device to the AO (Alarm Out) and G (Ground) connectors.
Connecting the Power
Connect power of 12VDC 450 mA for the network camera.
Connect the positive (+) pole to the '+' position and the negative (-) pole to the '-' position.
CAUTION:
Network Connection & IP Assignment
The eneo scanning device tool is used to locate all eneo network cameras in a local net-
work. The tool does not need to be installed with a setup program. The program exe-file
can be started directly from the CD with a simple double click to use the program.
• Be careful not to reverse the polarity when you connect
the power cable.
• You can also use a router featuring PoE (Power over Ether-
net) to supply power to the camera.
• If PoE and 12 VDC are both applied, the camera will be
supplied with the power from PoE.
EN
9
Publicité
