Publicité
Les langues disponibles
Les langues disponibles
FR
• Do not scrape the power cord across sharp edges and ensure
FR
that it does not get pressed.
ES
ES
4.2 INSTALLATION
PT
PT
tight it with appropriate tool.
IT
IT
EL
EL
• Screw the pump connecting piece onto the connection nozzle.
PL
PL
• Slide the hose clamp onto the hose.
• Slide the hose onto the pump connecting piece and secure it by means of a hose clamp
RU
RU
Connecting the discharge hose : illustration 2.1 to 2.2
Required accessories : Connector and PVC hose
KZ
KZ
UA
UA
RO
RO
4.3 FIRST USE
EN
EN
Priming the pump : illustration 3.1 and 3.2
the pump empties of water and plunge the pump back into the water. Restart the pump.
4.4 OPERATION
Start the product : illustration 4.4
Before any use, make sure that the pump is properly primed (see chapter above)
The shorter the hose length and the larger the hose diameter,
the higher the pump capacity
CAUTION ! Always wear safety glasses and gloves during
installation.
WARNING ! Read the « SAFETY INSTRUCTION » section at the
beginning of this manual including all text under subheading
therein before using this product.
Note: The pump must be fully immersed in water. Otherwise
the pump will not prime, will not be able to operate at its
184
Publicité
