Setting A Timer Recording - Samsung DVD-R120 Manuel De L'utilisateur

Setting a Timer Recording

You need to set clock (Initial Setup – Clock Set) before
proceeding with a timer recording. (See page 23)
1
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2 Press the OPEN/CLOSE button to close the
disc tray.
Wait until "LOAD" disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to format
or not will be asked first. (See page 31)
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. (See page 31)
3 Press the MENU button in stop mode.
You can also set a timer recording via the TIMER
button.
Press the ...† buttons to select Timer Rec.,
4
and then press the ENTER or √ button.
DVD-RAM(VR)
Title List
Timer Record
Scheduled Record List
Playlist
Disc manager
Timer Rec.
Setup
MOVE SELECT
Press the ...† buttons to select Timer
5
Record, and then press the ENTER or √
button.
The Timer Record Input items are displayed.
DVD-RAM(VR) Scheduled Record List
Recordable Time 02:12 SP
No. Source Date Start
01 -- -- --/-- --:-- -- --:-- -- --
No. 01
Source Date Start
CH 09 01/01 12 : 00 AM 02 : 00 AM SP
Recordable Time 02:12 SP
MOVE SELECT
Fill in the items using the ...†œ √ buttons.
6
œ √ : Moves to the previous/next item,
...† 0~9 : Sets a value.
Timer Record
√ √
√ √
RETURN EXIT
End Mode Edit
√ √
End Mode
RETURN EXIT
Source: The video input source (L1, L2 or DV), or
the broadcasting channel you want to make a timer
recording of. When selecting channels to be recorded, the
...† buttons on the remote control can let you select only
the channels that have been memorized during Auto Scan.
For the selection of other channels, use the number buttons.
Date: Date that the timer recording starts
01/01 Every Day
01/02 MON-SAT
MON-FRI
01/30 Every SAT
01/31
Every SUN
Start/End Time: Start and end time of the timer recording
Mode (Recording mode)
XP (High quality): Approx. 1 hour
SP (Standard quality): Approx. 2 hours
LP (Long recording): Approx. 4 hours
EP (Extended): Approx. 6 hours or 8 hours.
FR (Flexible Recording): See page 38.
When you are recording at EP mode on a
DVD-RW(V)/R disc, it may not record the
NOTE
full 6 or 8 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING system.
For example, if you record a program with a
lot of action, it uses a higher bit rate which
in turn consumes more disc memory.
7 Press the ENTER button.
DVD-RAM(VR) Scheduled Record List
Recordable Time 02:12 SP
No. Source Date Start
01 CH 09 01/01 12:00 AM 02:00 AM
02 -- -- --/-- --:-- -- --:-- -- --
MOVE SELECT
( ) and Timer Set will appear on the front panel
display. This means that a timer recording is set.
Recording is automatically performed when the set
time is reached.
If you make a mistake
Press the œ √ button to select the item
NOTE
you want to change.
If the timer settings overlap
The programs are recorded in order of
priority. If timer recording is set for the
first program and then again for the
second program and both programs
overlap, the following message will appear
on the screen: 'This setting is identical
with 1' The message shows that the first
program has priority.
After recording of the first program is
complete, the second program starts being
recorded.
To exit without saving the current
setting
Press the MENU or TIMER button.
To return to the previous menu
Press the RETURN button if you don't
want to set a timer recording.
End Mode Edit
SP
√ √
√ √
RETURN EXIT
37
English -