Making a One Touch
Recording (OTR)
You can set the DVD Recorder to record in preset
increments by pressing the REC button repeatedly.
1
If you want to record a TV channel, use the CH(
buttons or number buttons to select a desired channel.
If you want to record from a connected external
component, press the INPUT SEL. button to select an
appropriate external input(AV1, AV 2 or DV).
• CATV channels: 1 to 125
• TV channels: 2 to 69
Example 1) Selecting Channel 120
+
+
Example 2) Selecting Channel 9
+
2
Press the REC button to start recording.
3
Press the REC button to adjust the recording time.
© 0:30 © 1:00 © 1:30 © 2:00 © 3:00 © 4:00© off
The timer counter decreases to 0:00, then
s
the DVD Recorder stops recording.
NOTE
After finishing recording, the DVD
Recorder will be turned off automatically.
To view the current status of the disc and the progress of
recording : Press the INFO button, and information about
the disc will appear.
DVD-RW(VR)
Disc Name
Disc
Total Title
7
Total Playlist
None
Recordable Time 01: 11 XP
Protection
Not Protected
Screen
Recording : CH 10 [Mono]
JAN 01 2006 SUN
To stop recording
Press the STOP (
STOP button once more to cancel Timer Record." is
/
)
displayed.
Press the STOP (
You need to set the Clock (Setup – Clock Set) before
proceeding with a timer recording. (See page 31)
1
2
Disc Info
12:00 AM
3
Press the INFO button once again. Then you can check
the information about the title being recorded
DVD-RW(VR)
Name
JAN/01/2006 12:00 AM
CH 10
Recording Title 7
Created Time
JAN/01/2006 12:00 AM
Recording Time 00:00:41
JAN 01 2006 SUN
) button. The message "Press
Press STOP button once more
to cancel Timer Record.
) button again to stop recording.
Setting a Timer Recording
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc
tray.
Wait until "LOAD" disappears from the front panel
display.
If an unused DVD-RW disc is inserted, whether to
initialize or not will be asked first. (See page 46.)
Press the MENU button in Stop mode.
You can also set a timer recording via the TIMER button.
Recording Info
12:00 AM
English - 51