Connecting & Setting Up; Quick Overview - Samsung DVD-R120 Manuel De L'utilisateur

Connecting &
Setting Up
This section involves various methods of
connecting the DVD player to other external
components and required initial setting modes.

Quick Overview .....................................................14

Step 1 : Unpacking.................................................15
Step 2 : Connecting the Antenna cable
Step 3 : Connecting the Video cable.....................16
Step 4 : Connecting the Audio cable ....................18
Step 5 : Connecting external devices....................19
Step 6 : Connecting the Power cord.....................20
Step 7 : Preparing the Remote Control.................21
Step 8 : Initial Setup...............................................22
14
- English
Quick Overview
A Quick Overview presented in this guide will give you
enough information to start using the recorder.
Step 1 : Unpacking
†
Step 2 : Connecting the Antenna Cable
†
Step 3 : Connecting the Video Cable
†
Step 4 : Connecting the Audio Cable
†
Step 5 : Connecting external devices
†
Step 6 : Connecting the Power Cord
†
Step 7 : Preparing the Remote Control
†
Step 8 : Initial Setup
15
..............
Note to CATV system installer: This reminder is
provided to call CATV system installer' s attention to
Article 820-40 of the National Electrical Code
(Section 54 of Canadian Electrical Code, Part I), that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building as
close to the point of cable entry as practical.