Recording The Scheduled Record List - Samsung DVD-R120 Manuel De L'utilisateur

Recording the Scheduled
Record List
1 When the start time set in the Scheduled
Record List arrives, if the set is powered off,
the set will be automatically powered on and
starts recording. If the set is already powered
on, a message asking to confirm to proceed
or cancel the timer recording appears.
Timer Recording is going to be started soon.
Do you want to cancel timer recording?
When "Yes" is selected: Cancel
When "No" is selected: Recording
If you are not present to set Yes or No,
recording will still begin automatically.
NOTE
2 Thirty seconds before the stop time, a
message that asks whether to automatically
power off or not after recording is displayed.
Timer Recording is going to be ended soon
and power will be turned off automatically.
Press [ENTER] to continue to use DVD-Recorder.
When "OK" is selected: Power on after recording
If there is no entry: Auto power off
If you are not present to select OK, the
unit will power off automatically after the
NOTE
recording finishes.
40
- English
Yes No
OK
To stop Recording
Press the STOP( ) button, and a message that asks
whether to end recording or not will be displayed.
Do you want to stop recording?
Yes
When "Yes" is selected: Recording stops
When "No" is selected: Recording continues
If there is not enough disc space or a
copy prevention signal is received during
NOTE
recording, recording will stop.
You cannot record copy protected movie.
If there is no free disc space or the disc is
not recordable, recording will not operate.
(You can record after replacing the disc.)
No