Step 8 : Initial Setup; Osd Language Setup; Clock Set - Samsung DVD-R120 Manuel De L'utilisateur

BRAND BUTTON
SHARP 36, 37, 38, 39, 48
SIEMENS 71
SINGER 57
SINUDYNE 57
SONY 35, 48
TELEAVA 73
TELEFUNKEN 67, 73, 75, 76
THOMSON 72, 73, 75
THOMSON ASIA 80, 81
TOSHIBA 47, 48, 49, 50, 51, 52
WEGA 57
YOKO 06
ZENITH 63
If you replace the remote control's
batteries, you must set the brand code
NOTE
again.

Step 8 : Initial Setup

For ease of use, we recommend that you set up initial
settings before using the DVD Recorder.

1. OSD Language Setup

†

2. Clock Set

†
3. Channel Set
†
4. Audio Setup
†
5. Video Setup
22
- English
Before Play,
Turn on your TV and switch the input selector on your
TV so that the signal from the DVD Recorder appears on
your TV screen. If you connected an external Audio
System, turn on your Audio System and select AUX, CD
or DVD.
The OSD (On-Screen Display) displayed on the screen
may vary depending on conditions such as the disc type
and whether the disc has been inserted or not.
1. OSD Language Setup
After plugging in the recorder, the first time you press
the POWER button, this screen comes up.
(This screen will only appear when you plug in the
recorder for the first time.)
1
2
NOTE
OPEN / CLOSE OPEN / CLOSE
TV TV
DVD DVD INPUT INPUT
Press the POWER button.
Press a Number button to select the
language.
If the language for the startup screen is
not set, the settings may change whenever
you turn the power on or off. Therefore,
make sure that you select the language
you want to use.