Publicité
Les langues disponibles
Les langues disponibles
Power Settings
Press the On/Off button
u
fan will start at the 1st (lowest) speed and the Fan
indicator light
will flash.
Press the On/Off button
v
Fan Controls
When the range hood is in OFF position, press the
u
Fan button
once to turn the fan on
the 1st (lowest) speed. You will hear a beeping
sound.
Press the Fan button a second time to reach the 2nd
v
speed.
Press the Fan button a third time to reach the 3rd
w
speed.
Press the Fan button a fourth time to reach the 4th
x
(highest) speed.
Cleaning Filters
IMPORTANT: Drain oil from baffles, spacers, filters, oil tunnels, oil containers before oil and residue overflow!
• Remove all baffles, spacers, filters, grease tray, and oil containers and discard oil and residue.
• Wash with warm soapy water. NOTE: Stainless steel baffles, spacers and oil tunnel are top rack dishwasher safe.
• Dry thoroughly before replacing and follow directions for installation in reverse.
• Filters should be cleaned after every 30 hours of use.
• Should filters wear out due to age and prolonged use, replace with a new filter.
Operation
Timer
Light
to turn the fan on. The
to turn the fan on.
Maintenance
Fan
Using the Time Delay Function
When the range hood is in ON position, press the
u
Timer button once
The LCD display will flash and the time will be
automatically set for 5 minutes.
Press the Fan button
v
the Delay Auto Shut-Off function.
The time period can be adjusted up to 60 minutes
maximum.
Press the Timer button
w
Delay Auto Shut-Off function.
The Delay Auto Shut-Off Function will remember the
last time period selected.
Lights
Press the light button
u
off.
— 16 —
Power
to turn the Timer on.
to adjust the time period for
to cancel and stop the
to turn LED lights on and
Publicité
