Ferroli PREXTHERM RSH 950N Instructions D'utilisation, D'installation Et De Montage page 29

PREXTHERM RSH N
4.2 Operating principle
PREXTHERM RSH N boilers are fitted with a closed cylindrical furnace, in which the flame produced by the burner is reversed peripherally
toward the front. From there, the burned gas enters the fire tubes. At the outlet, the gas is collected in the smoke box, and is then sent to the
chimney. The combustion chamber is always pressurized during burner operation. For the pressure values, see Table 1, in the column Flue gas
side pressure drop. The flue and flue stack fitting must be made in accordance with current standards and legislation, using rigid pipes that are
resistant to high temperatures, condensate, and mechanical stress, and are airtight.
L1
fig. 1 - 100N÷420N
4.3 Technical data - Dimensions - Hydraulic connections
Key
1
Control panel
2 Burner bracket
3 Smokebox cleaning door
4 Flame inspection window
T1 Central heating feed
fig. 3
T2
Central heating return
T3 Expansion vessel connection
T4 Boiler drain
T5 Flue gas outlet
T6 Burner connection
cod. A73020821 - 2023-09
L1
fig. 2 - 500N÷950N
EN
29