Télécharger Imprimer la page

Behringer XENYX Q1202USB Guide De Démarrage Rapide page 19

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
PHONES/CTRL ROOM – The stereo
(16)
PHONES jack (at the top of the connector
panel) is where you connect headphones.
The unbalanced CTRL ROOM OUT jacks
carry the summed effects and main mix
signals, as well as soloed channel signals.
The PHONES/CTRL ROOM control adjusts the
level of both headphones and main monitor
outputs. The Q502USB is not equipped with
control room outputs.
MAIN MIX – The MAIN OUT connectors are
(17)
unbalanced mono jacks. The main mix signal
appears here at a level of 0 dBu. The MAIN MIX
fader adjusts the volume of these outputs.
The XENYX Q802USB and Q502USB mixing
consoles feature a rotary control for
this purpose.
2-TRACK INPUT – The 2-TRACK INPUTs
(18)
are used to bring an external signal source
(e.g. CD player, tape deck, etc.) into the
console. They can also be used as a standard
stereo line input, so the output of a second
XENYX or BEHRINGER ULTRALINK PRO MX882
can be connected.
2-TRACK OUTPUT – These connectors are
(19)
wired in parallel with the MAIN OUT and carry
the main mix signal (unbalanced). Connect the
2-TRACK OUTPUT to the inputs of your
recording device. The output level is adjusted
via the high-precision MAIN MIX fader or
rotary control (Q802USB/Q502USB).
USB/2-TR to MAIN – When pressed,
(20)
this button sends the audio from the
USB and 2-TRACK inputs to the main mix
(Q502USB only).
USB/2-TR to PHONES – When pressed,
(21)
this button sends the audio from the USB
and 2-TRACK inputs to the PHONES jack
(Q502USB only).
FX TO CTRL ROOM – If you want to monitor
(22)
only the FX send signal in your headphones
or monitor speaker(s), press the FX TO CTRL
switch. This mutes the main mix signal while
routing the FX SEND output to the monitor(s).
The XENYX Q802USB and Q502USB do not
feature this switch.
+48 V – The red +48 V LED lights up when
(23)
phantom power is on. The PHANTOM switch
activates the phantom power supply on the
XLR connectors of all mono channels.
POWER – The POWER LED indicates that the
(24)
console is powered on.
LEVEL INDICATOR – The high-precision
(25)
4-segment display accurately displays the
relevant signal level.
COMP – This knob adjusts the amount of
(26)
compression effect on the channel.
PHANTOM – Press this knob to send +48 V
(27)
of phantom power to the XLR inputs for use
with condenser microphones. The Q502USB
supplies +15 V of phantom power.
USB/2-TR TO PHONES/CTRL RM –
(28)
button routes USB/2-Track playback to
PHONES/CTRL ROOM.
USB/2-TR TO MAIN MIX – button routes
(29)
USB/2-Track playback to MAIN MIX and mutes
the 2-TR OUT/USB recording signal.
USB CONNECTOR – Connect your mixer to a
(30)
computer using a standard USB cable.
AC POWER IN – Connect the included power
(31)
cable here.
!
The mixer cannot be bus-powered via USB.
Always use the included power adapter to supply
power to the mixer.
19
Quick Start Guide

Publicité

loading

Ce manuel est également adapté pour:

Xenyx q1002usbXenyx q802usbXenyx q502usb