Télécharger Imprimer la page

Height Adjustment - Brunner 152 Mode D'emploi

Masquer les pouces Voir aussi pour 152:

Publicité

Les langues disponibles

Les langues disponibles

8 | F
8
F
|
9 | Option : accoudoirs multi-positions
(hauteur, profondeur, écartement et pivotant)
Réglage de la hauteur : par pression sur le bouton
situé sous l'accotoir derrière le bras.
Réglage de la profondeur : en coulissant l'accotoir
vers l'avant ou l'arrière.
Réglage de l'écartement : en coulissant latéralement
l'accotoir vers la gauche ou la droite.
Pivotement : en orientant l'accotoir vers l'intérieur ou
l'extérieur de l'assise après avoir libéré le petit levier
intégré à l'avant sous l'accotoir.
Roulettes
Des roulettes dures pour sols moquette et des roulettes
souples pour sols durs sont disponibles.
Les roulettes souples sont reconnaissables à leur bande
de roulement claire. Les roulettes sont interchangeables.
Conseils d'entretien
Tissu : d'une manière générale, nettoyer le tissu avec
un produit neutre et doux, puis laisser sécher.
Cuir : utiliser une solution d'eau chaude légèrement
savonneuse et essuyer délicatement avec une éponge.
Puis rincer en humidifiant une éponge avec de l'eau
claire et sécher avec un chi on doux.

1 | Height adjustment

The height of the chair can be adjusted by pulling the
first right handle under the seat. The optimal ergonomic
height can be attained by putting your feet flat on the
floor, with your knees at a right angle.
Warning: the gas spring must only be repaired or re-
placed by a trained professional!
2 | Seat depth adjustment
By pulling the second right handle under the seat, the
seat can be pushed forward. Just let go of the handle
when the desired position is attained.
3 | Synchronised movement: seat and back
The synchronised movement is stopped by raising the
left handle under the seat. To start it again, move the
small lever on the handle to the middle. The handle goes
back to its original position, allowing seat and back to
move together once again.
4 | Height adjustment of the back
By pressing the bottom edge of the back backwards
towards the back grip and then pushing up or down,
you can change the height of the back. Simply letting
go automatically sets the back to the desired position.
9 | E
9
E
|

Publicité

loading

Ce manuel est également adapté pour:

152a154154/a156156a158 ... Afficher tout