fadini FOX 724 Manuel D'instructions page 21

SYMBOL LEGEND
!
Pay a�en�on
i
Read the instruc�on manual
The measurements, unless otherwise specified, are in millimeters.
2. PRODUCT DESCRIPTIONS AND PURPOSE OF USE
The present actuator is intended for the automa�on of swing gates and swing doors, for residen�al or collec�ve (condominium) use. The
product is an electromechanical gear motor and consists of a founda�on box and transmission arms for the movement.
The gear motor is irreversible and it is possible to manually open or close the gate leaf, a�er unlocking it as indicated in Pic. 27.
The product is available in the following versions:
FOX 724 with encoder, 24 Vdc power supply, electronic command programmer ELPRO 42
FOX 730 with encoder, 230 Vac 50 Hz power supply, electronic command programmer ELPRO 43
ATTENTION
Do not use the gearmotor with control programmers not indicated in this instruc�on manual
3. PACKAGE CONTENTS
1. Screw TE M8x25 Zn
2. Washer ø 10 ø 40 Th.2 Zn
3. Mo�on sha� arms
4. Nut M12 Zn
5. Screw TE M12x50 Zn
6. Bent connec�ng rod
7. Actuator
5
1
2
3
4
7
The current electrical danger.
6
GB - 21
Pic. 1
FOX 724 | FOX 730