Publicité
Les langues disponibles
Les langues disponibles
EN
Accessories
• A range of accessories for this product are available from your Silverline dealer including SDS
Plus drill and chisel bits. Carbon brushes are available from www.toolsparesonline.com or your
Silverline dealer.
Maintenance
WARNING: Always remove the plug from the mains power supply before carrying out any
maintenance/cleaning.
Gearbox maintenance
Before first use and after every six hours of use (approx.), the gearbox must be regreased using the
supplied Pot of Grease (15) or a good quality lithium gearbox grease.
To access the gearbox, use the Gearbox Pin Spanner (14) to turn the Gearbox Cover (4) anticlockwise.
Remove the cap.
1. Cover the inside of the gearbox cavity with a thick layer of grease (no more than 20 grams).
2. Replace the Gearbox Cover and turn clockwise until it is secure.
• Do not over-tighten the Gearbox Cover.
• If you are not sure how to change the grease, the amount of grease, or which type of grease to
use, take your drill to your dealer or the nearest authorised service centre and ask a qualified
person to replace the grease.
Cleaning
• Keep your machine clean at all times. Dirt and dust will cause internal parts to wear quickly,
shortening the machine's service life. Clean the body of your machine with a soft brush or dry
cloth. If available, use clean, dry, compressed air to blow through the ventilation holes.
Brushes
• This product is supplied with a pair of Spare Brushes (21).
• Over time the carbon brushes inside the motor may become worn.
• Excessively worn brushes may cause loss of power, intermittent failure, or visible sparking.
• To replace the brushes, remove the Brush Access Cover (7) and the cover on the opposite side.
The worn brushes can then be withdrawn and replaced with new. Always replace worn brushes
in pairs. Refit the brush access covers. Alternatively, have the machine serviced at an authorised
service centre
Storage
After use, return the drill and accessories to the supplied case and store in a damp-free environment,
out of reach of children.
Disposal
Always adhere to national regulations when disposing of power tools that are no longer functional
and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and electronic equipment (WEEE), with
household waste.
• Contact your local waste disposal authority for information on the correct way to dispose of
power tools.
Contact
For technical or repair service advice, please contact the helpline on (+44) 1935 382 222
Web: www.silverlinetools.com
UK Address:
Toolstream Ltd.
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
EU Address:
Toolstream B.V.
Holtum-Noordweg 11
Unit 4
6121 RE Born
The Netherlands
10
Publicité
