COFFEE DISPENSING
Make sure that the button
light.
Never put fingers or objects in the capsule-holder.
Only compatible capsules must be introduced in the
capsule-holder.
Single-dose capsules are prepared to dispense one
coffee/product. DO NOT use the capsules more
than once. Inserting two or more capsules can cause
the machine to malfunction.
To always have a coffee at the perfect temperature,
it is recommended to preheat the cup with hot water.
Position the cup under the dispensing spout without in-
serting the capsule. Press the button
water enough to pre-heat the cup.
Place the cup under the coffee dispenser for a classic
espresso.
PREPARING THE COFFEE
lights up to a steady white
to supply hot
Remove the drip tray to use cups of different sizes for a
long coffee.
If, during the dispensing cycle power supply is interrupted
or water is exhausted within the tank proceed as follows:
- Restore the power supply or fill the water tank up to the
indicated MAX level.
- Press the button
to a steady white light.
- Replace the capsule inside the capsule fitting compart-
ment with a new one.
- Restart the coffee dispensing.
After 5 supplies the button
white light to indicate that the spent capsule drawer is
filled.
Empty the spent capsule drawer and press the button
to reset the coffee machine.
Now the machine is ready for a new supply.
27
E N
and wait for the button to light up
starts blinking fast with