Subaru J121SSL000 Instructions D'installation page 3

5 Exterior Graphic Placement
While using the handling tabs align the Exterior Graphic
to the door panel.
7
Exterior Graphic Placement
While using the handling tabs, lastly align the premask to the
character line on the bottom edge of the rear door. Ensure there
is a gap between premask and lower door trim.
Squeegee Exterior Graphic
9
Use caution not to scratch the paint surface with the squeegee.
Using smooth even overlapping strokes squeegee the Exterior
Graphic into position.
DESCRIPTION
Exterior Graphics - Side
6
8
10
ISSUE
DATE
00
2/5/24
Exterior Graphic Placement
While using the handling tabs, then align the left side of the
Exterior Graphic to the door panel edge.
Spray Exterior Graphic Premask
Spray the top surface of the premask with the soap and water
solution. This makes it possible for the squeegee to slide easily
across the surface.
Dry Fit Preparation
Peel away about 3-5" of the premask from the front edge of the
rear door to aid in checking alignment for next step.
SUBARU OF AMERICA
PAGE
3 / 6