temperature
relative humidity
9. ALARMS SHOWN ON DISPLAY
ALARM
10. TROUBLESHOOTING
Below is a list of possible malfunctions.
If the problem cannot be solved using the proposed solution, contact the Service Centre.
PROBLEM
The appliance is operating in
dehumidifying mode, but the
humidity does not decrease
2°C
-
30°C
30
-
90%
CAUSE
Tank
(A2)
incorrectly
positioned
Tank full
Room temperature too low
(see operating limits in chap.
"8. Technical Specifications")
Humidity in room too low or
too high for correct measuring
(see operating limits in chap.
"8. Technical Specifications")
Faulty probe
CAUSE
The filter is clogged
Either the temperature or
humidity in the room is too low
13
SOLUTION
missing or
Place the tank back in its correct position
(see paragraph "4.1 Draining into the
tank")
Empty the tank (see paragraph "4.1
Draining into the tank")
Increase the ambient temperature if
possible
Move the appliance to another room
with humidity and temperature levels
within the operating limits: if the
problem persists, call the Service
Centre.
Contact the Service Centre
SOLUTION
Clean the dust filter (para. "7.2
Cleaning the dust filter")
In
certain
conditions
appliance will not dehumidify:
check the operating limits of
the appliance (see chapter "8.
Technical Specifications"). In
certain
cases,
recommended to heat the
room
needing
dehumidified.
the
it
is
to
be