Publicité
Les langues disponibles
Les langues disponibles
1. To turn the appliance on, press the
(B1).The appliance will operate in the
previously set mode.
2. If there is a blackout, when the power is
restored
the
operation in the previously set operating
mode. Please note:
•
If the
symbol (C5) appears the tank (A2)
needs to be emptied or properly positioned.
(see paragraph "4.1 Draining into the tank").
•
The appliance is equipped with a security
device (delay of 3 minutes) that protects the
compressor against too frequent starts and
stops. The operating lights C1 or C2 blink.
5.1 Dehumidifying mode
1. Press the button (B2). The
turn on, on the display (fig. 7).
2. The display shows the previously set relative
humidity value. When the value blinks, the
setting can be changed by repeatedly
pressing the button. There are 7 different
relative humidity settings ranging from 30%
(dry
environment)
environment). Depending on the ambient
conditions, it may not be possible for the
appliance to reach the minimum settable
value. In these cases it is recommended to
heat the environment needing to be
dehumidified.
3. When the set relative humidity value stops
blinking, the display shows the percentage of
relative humidity in the room. The appliance
may take a few seconds to display the value
of the relative humidity in the room.
4. When the room reaches the preset relative
humidity
level,
dehumidifying and operates at a very slow
ventilation speed.
5.2 Dry mode
1. Press the
turns on and the display shows the "
symbol (fig. 8).
appliance
will
light (C1) will
to
70%
the
appliance
button (B3). The light (C2)
2. The appliance automatically operates at the
button
maximum dehumidifying capacity.
Note:
The Dry mode is recommended for particularly
resume
humid environments or to dry laundry more
quickly.
6. TIMER FUNCTION
•
The timer can be used to delay appliance
start-up and shut-down.
energy wastage, ensuring the appliance
operates only when needed.
•
When
How to programme delayed start-up
1. With the appliance in stand-by mode, press
the button (B4). The light (C6) is on and the
display shows the number relative to the
selected hours flashing (fig. 9);
2. Set the desired number of hours by
repeatedly pressing the button (B4). 1, 2, 4,
6, 8, 12 hours can be selected.
3. After a few seconds, the appliance will
return to stand-by mode and the
(humid
(C6) will remain lit on the display.
4. After the programmed time, the appliance
will turn on in the previously set operating
mode.
How to programme delayed shut-down
1. With the appliance running, press the
button (B4): The light is on and the display
shows the number relative
to the selected hours flashing (fig. 9);
2. Set the desired number of hours by
repeatedly pressing button (B4). 1, 2, 4, 6,
8, 12 hours can be selected.
stops
3. After a few seconds, the display returns to
the current operating mode and the
light (C6) remains lit.
4. After the programmed time, the appliance
will automatically turn off. Note:
•
Once the timer has been programmed, to
"
see the remaining time until start-up or shut-
down, press the
11
programming
is
light is on.
button once.
This will avoid
enabled,
The
light
Publicité
