Dreame Roboticmower A1 Instruction Originale page 18

6.4 Set path
For isolated zones, please create a path to connect them. Isolated zones without a path will be inaccessible
to A1.
Note: A1 can move in the path, but does not mow grass.
Note: If your lawn is divided by passages higher than 4 cm, place an object with a slope equal in height to
the passage (such as a ramp).
• To connect two isolated work zones
If there is overlap space between new area(s) and the original area, they will be automatically combined.
For isolated areas, please create paths to connect them, otherwise they will be inaccessible to A1. Tap "Path"
and remote control A1 to create a path.
Note: Make sure the beginning and end of the path are in the work area. Keep at least 1 m distance
between the beginning/end of the path and the boundary.
EN 18