Dreame Roboticmower A1 Instruction Originale page 10

2 Insert the charging tower to the baseplate until you hear the click.
3
Insert the cleaning brush into the charging tower by aligning the tongue with the groove.
4
Connect the power supply to the extension cable and then connect to a power outlet. Please keep the
power supply at least 30 cm above the ground.
Note: The LED indicator on the charging station will be constant blue if all connections are correct.
5
Put A1 in the charging station to charge. Make sure the charging contacts on A1 and the charging
station are connected correctly.
Note: The indicator light will blink green if A1 successfully docks in the charging station.
EN 10