Dreame Roboticmower A1 Instruction Originale page 15

• A1 correctly docks in the charging station.
6.1 Create the boundary
1 Tap "Start Creating" via the app, and A1 will check its status and calibrate. It will automatically leave
the charging station to do the calibration. Please be careful.
2 Remote control A1 to the edge of your lawn and tap "Set Starting Point" to confirm the starting point
of the boundary.
3
Remote control A1 to move along the edge of your lawn to create the work area. When remotely
controlling A1 to create the boundary, please bear in mind:
Warning: Do not manually move A1 when creating the boundary, otherwise the mapping may fail.
Warning: When mapping begins via remote control, do not remotely dock A1 in the charging station
until the mapping is complete. Otherwise, the LiDAR may be blocked, which can cause the mapping to fail.
• Walk within 5 m behind A1 when remotely controlling it.
15 EN