Publicité
Les langues disponibles
Les langues disponibles
8 - Use the handle (E) supplied to raise and over-
turn the stone frame (F).
Do this every day to allow residue to be burnt off
the ceramic bricks.
9 - Remove the drip tray (G), drain it and clean it.
CLEANING THE BURNER
To carry out this operation, proceed as follows.
1 - Remove the plate, the splashguard frame and
the grid clearance reduction (see page 10).
2 - Lift and remove the burner (A).
3 - Clean the burner (A) and check that its holes
are not blocked.
Caution - warning
Take care never to pour water or allow dirt to
fall into the burner as this will cause the burn-
er to malfunction.
4 - Clean the interior of the device and drain all res-
idue into the drip tray.
Caution - warning
Check that the burner (A) bushing (B) is not
blocked.
Do not dump the contents of the drip tray in
the environment; dispose of it in accord-
ance with the laws in force in the country of
use.
10 - Restore the initial conditions after completing
the operation.
E
F
- 11 -
Important
E
F
G
B
A
IDM-39617200900.tif
IT
GB
DE
FR
ES
IDM-39617201000.tif
English
Publicité
