SAFETY AND INFORMATION SIGNS
The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data.
B)Burn hazard: watch out for hot surfaces.
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
D)General hazard: read the manual carefully be-
fore carrying out any procedure.
E)General hazard: all relevant regulations must be
complied with. "Install in compliance with the rel-
evant regulations and use in well ventilated
premises only".
F) General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of
failure to comply with the installation and com-
missioning instructions".
STANDARD ACCESSORIES
The appliance is delivered complete with the follow-
ing:
A)Brush
B)Manual pilot light ignition kit
C)Residue drain extension.
D)Drip tray support
E)Drip tray
F) Grill lifting handle
A
G)CE marking: indicates that the appliance is com-
pliant with the relevant norms.
H)General hazard: use only ceramic heating
stones supplied by the manufacturer.
C
- 5 -
F
E
B
G
C
H
IDM-39617200300.tif
A
B
E
F
D
IDM-39616500400.tif
D
IT
GB
DE
FR
ES
English