Lighting
1 - Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1) while keeping button (B) pressed, to
light the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple.
4 - Turn the knob (A) anti-clockwise (pos. 2) to light
the burner.
5 - Turn the knob (A) gradually anti-clockwise to
adjust the power of the flame down to the mini-
mum setting (pos. 3).
Turning off
6 - Turn the knob (A) clockwise (pos. 1) to turn the
burner off.
The pilot light will remain on to allow the burner to
be re-lit.
7 - Turn the knob (A) clockwise (pos. 4) to
turn off the pilot light.
8 - Turn off the knob to ensure safety.
If the appliance is to be out of use for a lengthy pe-
riod, proceed as follows.
IT
IT
1 - Turn off the gas supply tap.
2 - Clean the appliance and the surrounding areas
GB
GB
thoroughly.
DE
DE
FR
FR
To ensure correct use of the appliance, the follow-
ES
ES
ing rules should be adopted.
– Use only the accessories recommended by the
constructor.
– Only use the device for cooking with the food in
direct contact with the cooking plate.
– Set the plate to the most suitable angle for cook-
ing to enable residue to flow towards the drip
tray.
– Fill the drip tray with a small amount of water to
facilitate cleaning after use.
English
SWITCHING THE BURNER ON AND OFF
LENGTHY DOWNTIMES OF APPLIANCE
USEFUL ADVICE FOR USE
1
A
4
3 - Spread a film of edible oil over the stainless
steel surfaces.
4 - Carry out all the servicing procedures.
5 - Cover the appliance and leave a few gaps to al-
low air to circulate.
– Always keep the appliance and the surrounding
areas clean.
– When cleaning, use only food-approved deter-
gents.
Caution - warning
During routine use of the appliance, the Oper-
ator's constant presence is required.
- 8 -
A B
2
3
IDM-39617200600.tif