List of pictograms used
Safety information
Instructions for use
Thermostatic Bath Mixer Tap/
Thermostatic Shower Mixer
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
Familiarise yourself with the product before using it
for the first time. In addition, please carefully refer to
the operating instructions and the safety advice be-
low. Only use the product as instructed and only for
the indicated field of application. Keep these instruc-
tions in a safe place. If you pass the product on to
anyone else, please ensure that you also pass on all
the documentation with it.
Proper use
This product is suitable for all pressure-tight hot water
systems such as central heating boilers, instantaneous
water heaters, pressurised boilers and the like. It is
not suitable for low-pressure water heaters such as
wood or coal burning bath geysers, oil or gas bath
geysers, open electrically heated water tanks. If in
doubt please seek the advice of a plumber or heating
engineer. Any use other than that described here or
modification to the product is not permitted and may
lead to damage to persons or property. There is
also the risk of injury and loss of life. The product is
intended for personal use only and not for medical or
commercial use. The manufacturer accepts no liability
for loss or damage arising from improper use.
Description of parts
2 S-connectors
1
2 Rosettes
2
2 Sealing rings
3
1 Tap body
4
1 Changeover button (for HG00625A only)
4a
6
GB/IE/NI
1 Threaded connector (for the shower hose)
4b
2 Nuts
4c
1 Mixer nozzle (for HG00625A only)
5
1 Water flow switch
6
1 Water temperature switch
7
1 Cartridge
8
Technical data
Connection spacing:
Connections (Shower hose): G½
Water connection nut:
Safety advice
Keep the product away from children. The product
is not a toy.
CAUTION - RISK OF ELECTRIC
SHOCK! Leaks or the escape of
water can lead to danger to life from
electric shock. Check all connections for leaks
carefully. In addition, ensure that all cables from
electrical devices are correctly and safely installed.
CAUTION! RISK OF INJURY! Please ensure
that no parts are damaged and that all parts are
correctly assembled. Incorrect assembly could
lead to injury.
Please note that seals are wear parts and there-
fore will require to be replaced from time to time.
Damaged parts could adversely affect safety
and proper function.
CAUTION! RISK OF DAMAGE TO
PROPERTY! Have the installation done by
experienced persons only. Leaks or escape of
water can lead to serious damage to buildings
or household fittings and furniture. Check all
connections for leaks carefully.
Ensure that all seals are correctly seated to
prevent leakage of water.
CAUTION! DANGER OF SCALDING!
When making the hot water setting please ensure
that the temperature of the water is not too high.
136/164 mm
(approx. 21 mm)
G¾
(approx. 30 mm)