Publicité
Les langues disponibles
Les langues disponibles
Operation
6
Operation
6.1
Rotary motor
If the rotary motor and the PGH pallet fork attached to it are prevented from swinging out,
loads may occur that can cause the rotary motor or the suspension to break.
The following illustrations show the correct and incorrect position of the rotary motor during the load stroke.
The rotary motor with load is prevented from swinging
freely and hangs downwards at an angle during the load
stroke. Risk of breakage!
6.2
Slope and distance
Care must be taken to ensure that the forks
with the package tilt slightly backwards at an
angle.
When lifting, the package must not be tilted
backwards by less than 5°!
Otherwise there is a risk of the package
slipping forwards. Danger to life!
The distance between the package and the
handle of the pallet fork must not be greater
than 2 cm!
56000010 / 56000011 / 56000025 / 56000024
Fig. 1
The rotary motor with load can swing freely in any
direction and hangs vertically downwards during the load
stroke!
16 / 21
Fig. 2
GB
Publicité
