probst PGH-15-K Instructions D'emploi page 35

Safety
2.8 Function Control
2.8.1 General
•
Before every usage of the device check the functions and the working condition.
•
Maintenance and lubrication are only permitted when device is shut down!
•
Do not use the device, until all faults which can cause safety hazards are removed.
•
If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using
it.
•
The operating instructions must be available at the workplace every time.
•
Do not remove the type plate of the machine.
•
Unrecognisable information signs (such as regulatory or prohibition signs) must be replaced.
2.8.2 Hydraulic
•
Check all hydraulic hoses and connection for tightness before every operation.
Only experts are allowed to replace faulty parts (depressurized).
•
Ensure a clean working environment before opening the hydraulic connection.
When working on the hydraulic system, ensure cleanliness.
•
The hydraulic hoses must be free of breaks and abrasion. Take care that there are no outstanding
edges, where the hoses could hook in.
•
The operator of the device is responsible for a constant line pressure, which is necessary for the
working with this device.
•
Only under these conditions is a safety gripping, lifting and transporting of the gripping goods with
this device ensured.
56000010 / 56000011 / 56000025 / 56000024 7 / 21 GB